index_title=Simple Firewall Creator index_version=Version $1 index_iptables=Using iptables index_ipf=Using ipf index_apply=Apply Configuration index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. index_bootup=Activate at boot index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. index_return=module index rules_title=Firewall Rules rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. rules_add=Add a new firewall rule. rules_sadd=Add a new section separator. rules_return=rules list rules_log=and log rules_move=Move rules_service=Services rules_no=No. rules_enable=Enable Selected rules_disable=Disable Selected rules_logon=Log Selected rules_logoff=Don't Log Selected rules_delete=Delete Selected rules_desc=Comment rule_num=No. rule_desc=Rule comment rule_source=Source/Output Intf rule_dest=Destination/Input Intf rule_service=Destination services rule_action=Action rule_enabled=Enabled rule_any=Any rule_yes=$yes rule_no=$no rule_accept=Accept rule_allow=Allow rule_drop=Drop rule_deny=Deny rule_reject=Reject rule_ignore=Ignore rule_title1=Create Rule rule_title2=Edit Rule rule_title3=Insert Rule rule_header=Firewall rule details rule_anywhere=Any rule_anywheresource=Any host or network rule_anywheredest=Any host or network (except the firewall host) rule_host=Host or network rule_resolv=Resolve hostname to IP address rule_named=named rule_group=Host groups rule_iface=Network interface rule_oifc=Other.. rule_anyserv=Any service rule_oneserv=Only services .. rule_log=Log as well? rule_not=Must not match rule_none=None rule_err=Failed to save rule rule_esource=Missing or invalid source hostname, IP address or network rule_edest=Missing or invalid destination hostname, IP address or network rule_before=Add Rule Before rule_after=Add Rule After rule_atpos=Position in list rule_end=End of list rule_pos=Before rule $1 ($2 -> $3) rule_spos=Before separator ($1) rule_ename=Invalid group name for host or network rule_egroups=No groups selected rule_eservices=No services selected rule_time=Times rule_anytime=Any rule_seltime=During selected time rule_rusured=Are you sure you want to delete this rule? rule_rusures=Are you sure you want to modify this rule? rule_goahead=Yes, Do It sep_title1=Create Section sep_title2=Edit Section sep_title3=Insert Section sep_header=Firewall rule list section details sep_desc=Section name sep_err=Failed to save section sep_edesc=Missing section name services_title=Services and Protocols services_header1=User-defined services services_header2=Standard services services_add=Add a new service. services_return=services list service_name=Name service_ports=Protocols and ports service_proto=Protocol service_port=Port or port range service_title1=Create Service service_title2=Edit Service service_header=User-defined service details service_err=Failed to save service service_ename=Missing service name service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 service_eicmp=Missing or invalid ICMP type number in row $1 service_eip=Missing or invalid IP protocol number in row $1 service_enone=No protocols and ports entered service_eclash=A service with the same name already exists service_eprotos=All protocols must be the same service_err2=Failed to delete service service_einuse=This service is being used by a rule service_einuse2=This service is a member of another service service_members=Member services groups_title=Host and Network Groups groups_add=Add a new host and network group. groups_none=No host groups have been defined yet. groups_return=groups list group_name=Group name group_members=Member hosts / networks group_members2=Member groups group_title1=Create Group group_title2=Edit Group group_header=Host and network group details group_err=Failed to save group group_ename=Missing or invalid group name group_eclash=A group with the same name already exists group_emember='$1' is not a valid hostname, IP address or network group_emembers=No group members entered group_neg=Negate group_err2=Failed to delete group group_einuse=This group is in use by a rule group_in_use_nat=This group is in use by a nat rule group_in_use_group=This group is in use by the group group_eself=A group cannot contain itself as a member group_resolv=Resolve hostnames to IP addresses group_eneg=Negation cannot be used with the network range $1 anywhere=Anywhere anywhere_but=Anywhere except firewall nowhere=Nowhere not=Not $1 iface=Interface $1 iface_not=Not interface $1 nat_title=Network Address Translation nat2_title=Failover NAT nat_desc=NAT status nat_nets=Networks to translate dynamically nat_excl=Except for destinations nat_disabled=Disabled nat_enabled=Enabled, on external interface nat_header=Current NAT settings nat_err=Failed to save NAT settings nat_eiface=Missing or invalid external interface nat_maps=Static external to internal translations nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. nat_ext=External IP address nat_int=Internal IP address nat_virt=External interface nat_eext=The external name/group has more then 1 IP in row $1 nat_eint=The internal name/group has more then 1 IP in row $1 logs_title=View Live Firewall Log logs_viewing=Viewing the firewall log file $1 .. logs_download=Download authlogs_title=View Live Security Log pat_title=Port Address Translation pat_desc=PAT status pat_disabled=Disabled pat_enabled=Enabled, using external interface pat_forward=External services to forward pat_service=Service pat_host=To internal host pat_iface=External interface pat_header=Current PAT settings pat_err=Failed to save PAT settings pat_ehost=Missing or invalid internal host in row $1 pat_eiface=Missing or invalid external interface in row $1 spoof_title=Address Spoofing Prevention spoof_desc=Prevention status spoof_disabled=Disabled spoof_enabled=Enabled, on external interface spoof_nets=Internal networks spoof_header=Current spoofing prevention settings spoof_err=Failed to save address spoofing settings spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 spoof_enets=No internal networks were entered syn_title=Syn Attack Prevention syn_header=Current syn attack prevention setting syn_flood=Block syn flood attacks? syn_spoof=Block TCP connections that do not start with syn packet? syn_fin=Block TCP packets with both syn and fin set? apply_title=Applying Configuration apply_doing=Now applying firewall configuration .. apply_done=.. done. Firewall rules are now active, and routing has been enabled. apply_failed=.. failed : $1 apply_return=previous page apply_button=Apply Configuration apply_ecannot=You are not allowed to apply the firewall configuration stop_title=Stopping Firewall stop_doing=Disabling firewall .. stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. stop_failed=.. failed : $1 backup_title=Backup Configuration backup_header=Firewall settings backup options backup_dest=Backup destination backup_dest0=Download in browser backup_dest1=Save to file on server backup_dest3=Email to address backup_dest2=FTP to server backup_ftpfile=save as file backup_ftpuser=Login as user backup_ftppass=with password backup_what=Objects to backup backup_ok=Save and Backup Now backup_save=Save Settings backup_err=Failed to backup configuration backup_edest=Missing or invalid backup destination file backup_edestdir=Directory for destination file does not exist backup_ewhat=Nothing selected to backup backup_ewhat2=None of the selected objects are in use on this firewall backup_done1=A backup of the firewall configuration has been successfully saved to $1. backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. backup_done3=A backup of the firewall configuration has been successfully emailed to $1. backup_donesched=The schedule backup settings have been saved. backup_pass=Password for backup file backup_nopass=None backup_epass=No password entered backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. backup_sched=Backup on schedule? backup_nosched=No backup_interval=Yes, on schedule backup_eemail=Missing or invalid-looking email address backup_eftphost=Missing or invalid FTP server backup_eftpfile=Missing FTP filename backup_eftpuser=Missing FTP login name restore_title=Restore Configuration restore_header=Firewall settings restore options restore_src=Backup source restore_src1=Uploaded file restore_src0=File on server restore_what=Objects to restore restore_ok=Restore Now restore_err=Failed to restore configuration restore_esrc=The source file on the server does not exist restore_efile=No uploaded file was selected restore_ewhat=Nothing selected to restore restore_etar=The selected backup source file is not in a valid format restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : restore_enat=The group $1 used for Network Address Translation does not exist. restore_epat=The service $1 used for Port Address Translation does not exist. restore_eservice=The service $1 used in rule $2 does not exist. restore_etime=The time range $1 used in rule $2 does not exist. restore_egroup=The group $1 used in rule $2 does not exist. restore_done=The firewall configuration has been successfully restored from the chosen backup file. restore_pass=Password for backup file restore_epass=Password is incorrect restore_epass2=The backup is password protected, but no password was entered acl_features=Editable module features acl_rfeatures=Viewable module features acl_all=All acl_sel=Selected below .. ecannot=You are not allowed to use the $1 page acl_apply=Apply Configuration acl_bootup=Activate at boot time acl_edit=Can edit firewall settings? users_desc=The users listed on this page have access to firewall module, with the selected privileges. users_title=Firewall Users users_add=Add a new firewall user. users_name=Username users_ips=Allowed IPs users_enabled=Enabled? users_allow=Only $1 users_deny=All except $1 users_all=All users_edit=Can edit? users_none=No users with access to only the firewall have been created yet. users_return=user list user_title1=Create User user_title2=Edit User user_header=Firewall user details user_name=Login name user_pass=Password user_same=Don't change user_change=Set to user_enabled=Login allowed? user_err=Failed to save user user_ename=Missing username user_mods=Available Webmin modules bootup_ecannot=You are not allowed to enable or disable the firewall at boot time log_create_rule=Created rule for $1 to $2 log_update_rule=Modified rule for $1 to $2 log_delete_rule=Deleted rule for $1 to $2 log_move_rule=Moved rule for $1 to $2 log_create_service=Created service named $1 log_update_service=Modified service named $1 log_delete_service=Deleted service named $1 log_create_group=Created host group named $1 log_update_group=Modified host group named $1 log_delete_group=Deleted host group named $1 log_create_user=Created firewall user $1 log_update_user=Modified firewall user $1 log_delete_user=Deleted firewall user $1 log_create_time=Created time range $1 log_update_time=Modified time range $1 log_delete_time=Deleted time range $1 log_create_sep=Created separator $1 log_update_sep=Modified separator $1 log_delete_sep=Deleted separator $1 log_update_nat=Updated NAT settings log_update_pat=Updated PAT settings log_update_spoof=Updated anti-spoofing settings log_syn=Updated syn attack settings log_apply=Applied Configuration log_bootup=Enabled firewall at boot time log_bootdown=Disabled firewall at boot time log_backup=Backed up firewall to file $1 log_backup_file=Backed up firewall to browser log_restore=Restored firewall from file $1 log_restore_file=Restored firewall from uploaded file log_oldenable_rules=Enabled $1 rules and disabled $2 rules log_enable_rules=Enabled $1 rules log_disable_rules=Disabled $1 rules log_logon_rules=Turned on logging for $1 rules log_logoff_rules=Turned off logging for $1 rules log_delete_rules=Deleted $1 rules log_import_rules=Imported rules log_import_services=Imported services log_import_groups=Imported groups log_import_times=Imported time ranges ipsec_title=FreeSWAN Configuration times_title=Time Ranges times_name=Range name times_hours=Hours of day times_days=Days of week times_all=All times_add=Add a new time range. times_none=No time ranges have been defined yet. times_return=time ranges time_title1=Create Time Range time_title2=Edit Time Range time_name=Time range name time_header=Time range details time_hours=Hours of the day time_allday=All day time_from=From time_to=to time_days=Days of the week time_allweek=All week time_sel=Selected days .. time_err=Failed to save time range time_ename=Missing or invalid range name time_eclash=A time range with the same name already exists time_efrom=Missing or invalid starting time - must be in HH:MM format time_eto=Missing or invalid ending time - must be in HH:MM format time_ehourfrom=Invalid hour in start time time_ehourto=Invalid hour in end time time_eminfrom=Invalid minute in start time time_eminto=Invalid minute in end time time_edays=No days of the week selected time_err2=Failed to delete time range time_einuse=This time range is being used by a firewall rule remote_title=Remote Logging remote_header=Remote firewall logging settings remote_host=Send logs to remote host? remote_port=on port remote_to=Yes, to remote_user=Login as user remote_pass=Login with password remote_err=Failed to save remote logging settings remote_ehost=Missing or invalid hostname remote_euser=Missing username remote_econnect=Could not connect to host : $1 remote_etimeout=Timed out import_title=Import Objects import_header1=Rule import options import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
import_header2=Service import options import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
import_header3=Group import options import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
import_header4=Time range import options import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
import_src=CSV file source import_ok=Import Now import_err=Import failed import_erow=Line $1 of the CSV file is invalid : $2 import_esource=Invalid source address or network on line $1 : $2 import_edest=Invalid destination address or network on line $1 : $2 import_eservice=Unknown service on line $1 : $2 import_etime=Unknown time range on line $1 : $2 import_eaction=Unknown action on line $1 : $2 import_eservname=Missing service name on line $1 import_eservclash=Service name is already in use on line $1 : $2 import_eproto=Missing or unknown protocol on line $1 : $2 import_eport=Missing or invalid port number on line $1 : $2 import_egroupname=Missing group name on line $1 import_egroupclash=Group name is already in use on line $1 : $2 import_ehost=Invalid host name on line $1 : $2 import_etimename=Missing time name on line $1 import_etimeclash=Time name is already in use on line $1 : $2 import_etimeday=Invalid day of the week on line $1 : $2 import_etimehour=Invalid time range line $1 : $2 import_etimenone=No days or times specified on line $1 import_done1=$1 firewall rules have been successfully imported. import_done2=$1 services have been successfully imported. import_done3=$1 groups have been successfully imported. import_done4=$1 time ranges have been successfully imported. report_title=Search Log report_pos=Log entries $1 to $2 of $3 report_action=Action report_date=Date report_time=Time report_src=Source report_dst=Destination report_dst_iface=Interface report_proto=Protocol report_src_port=Source port report_dst_port=Dest port report_first=Log time report_last=Log time report_rule=Rule no. report_rule2=Rule report_none=No matching firewall log entries were found. report_none2=No firewall log entries have been recorded yet. report_search=Find log entries where .. report_reset=Show all entries report_mode0=Ignored report_mode1=Equals report_mode2=Not equals report_mode1first=After report_mode1last=Before report_welf=Export in WELF Format report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. report_err=Failed to export logs report_done=Successfully exported $1 log entries in WELF format to $2. report_save=Save Search report_savedesc=Enter a name below and click this button to save this search for later user. report_savename=Search name report_load=Load Search report_loaddesc=Select a saved search below and click this button to display matching log entries. report_esave=Missing or invalid name for saved search report_usesaved=Use saved search report_return=firewall log other=Other.. searches_title=Saved Searches config_title=Module Configuration welf_title=WELF Export welf_header=WELF log entries export welf_dest=Send WELF file to welf_err=Failed to export logs welf_done1=Firewall logs in WELF format have been successfully saved to $1. welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. welf_done3=Firewall logs in WELF format have been successfully emailed to $1. welf_ok=Export Now bandwidth_title=Bandwidth Monitoring bandwidth_header=Setup bandwidth usage monitoring bandwidth_enabled=Monitor network traffic for bandwidth reporting? bandwidth_yes=Yes, on interface monitor_type=Simple Firewall Rule monitor_rule=Fail when rule is hit monitor_num=Rule $1 ($2 -> $3) __norefs=1